The advantage of the newer versions is that they might have a working checksum calculation, as opposed to the v13 which I have.
MPPS, WinOLS free (for viewing / comparison), HxD (for editing), ECM Titanium for checksum.
I usually make the changes in WinOLS since values are shown in base10, copy the changes in the new binary file in HxD and then load the new binary in WinOLS to compare. If all is well, I calculate checksum and flash
I'll need to confirm the cooling maps by getting the fan to trigger at lower temperatures.
Normally, a quicker ramp-up past 100*C can be achieved by changing the 106*C Y-axis point to 102-103*C.