AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Bushings (reconditioning distributor)
Thread: Bushings (reconditioning distributor)
View Single Post
  #1  
Old 18-04-2022
tazwegion's Avatar
tazwegion  tazwegion is offline
Full Flexer
  
Join Date: Oct 2009
Location: Sunraysia
Posts: 960
Likes: 26
Liked 32 Times in 18 Posts
Check out my Ride(s)
Question Bushings (reconditioning distributor)
Has anyone replaced the bush or bushes in their distributor?

Are they solid brass (like in the older engines)

Is it a roller bearing as in some European/later model distributors?

My distributor has done 300K and has developed a lot of endshaft play and apparently an ever worsening misfire issue, the FSM has a exploded view but the bushes are not indicated in the diagram.
__________________
"Facts do not cease to exist because they are ignored..." - Aldous Huxley
Last edited by tazwegion; 18-04-2022 at 09:50 AM.