Let me confirm but it’s only a 10mm hose and absolutely nothing special other than the bend and will measure that angle. I have a lot of silicone hose left from the under valley so will see if it can safely bend to that angle as well. Mind you this one is not as problematic so one change at ten years would be fine.
I might order the front water pipe with two seals for $16 dollars and see what that looks like. (Backup only). I found using the app was only effective way to search deep into suppliers and look at their volume sold as the measure to buy.
Update: confirmed as 10mm inner dia and total point to point length is 8.5mm with approx 45 degree bend which is a bit to much to force a bend with silicone or normal.
Last edited by Mousie; 26-07-2022 at 10:01 AM.
|