AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Building a secondary cage
Thread: Building a secondary cage
View Single Post
  #1  
Old 07-03-2005
Wooders's Avatar
Wooders  Wooders is offline
Time to tinker
  
Join Date: Jul 2002
Location: www.wooders.com.au
Posts: 10,682
Likes: 134
Liked 448 Times in 233 Posts
Default Building a secondary cage
Well for TTC I've decided to build a secondary cage with will fit behind but inside (narrower) than the stock main hoop. It will have dual diagonal braces & horrizontal bar for the Harness route.
Then will have diagonal rear legs going to the floor.
The idea is to have something that meets (and exceeds) the safety regs - but means I don't need to register as a 2 seater as this section will be removeable.

Ok that's the overview.
Bender arrived last week.
12 meters of 48.3mm OD (40mm Nominal bore) 3.7mm wall seemless pipe arrived today.....

Pics will come as the project progresses.....