AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Scangauge II XGauge codes
View Single Post
  #2  
Old 18-12-2012
jono1967's Avatar
jono1967  jono1967 is offline
Full Flexer
 
Join Date: May 2011
Location: Frankston
Posts: 635
Likes: 0
Liked 9 Times in 7 Posts
Default

Parameter TXD RXF RXD MTH Transmission Oil Temperature 07E12172 032100000000 1810 000100400000 TF1 Degrees Fahrenheit Transmission Oil Temperature 07E02172 032100000000 1810 000100400000 TF2 Degrees Fahrenheit Transmission Oil Temperature 07E12173 032100000000 3010 000100400000 TF3 Degrees Fahrenheit Transmission Oil Temperature 07E12173 032100000000 1810 000100400000 TF4 Degrees Fahrenheit not sure how this will come out on the post, i copy/pasted it from a e-mail. i tried all these codes, one of them works, i think it was the TF2. it gives a value, but my jeep is still in the workshop in bits so i dont know if it is reading correctly. hope this helps. my jk has a diesel in it with a 545 RFE box. frosty

I found this see if it works on yours