### Update ###
I went to pull out the radiator so I could get behind it and pressure wash it from behind, but forgot about that quick connect coupling on the bottom transmission cooling hose. As I didn't have 2 hose clamps to suit I couldn't cut it off.
I did manage to bring it forward enough to get behind it and do the job.
But it was the air condoning condenser that was choked full of mud.
I'm looking forward to testing it out!
But I do have a question. Short of not driving through mud, is there a way to stop it getting in without restricting air flow? I suppose hosing it off after every trip would help, but unless you pull everything apart you're just going to push the mud further in.
|