AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Falcon shocks, rims and flares
View Single Post
  #7  
Old 22-11-2018
JPJ  JPJ is offline
I just registered
 
Join Date: Apr 2014
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

Im running a similar setup to what your describing.

Falcon 3.3, 315/70r17 on Fuel Trophys which are 17x8.5 -6 offset. I've added uneek4x4's 1 inch spacer to the stock flare and the tyres are still protrude about 1 inch. I also put the falcon HD mounts which sit close to the inside tyre wall.

Quote:
Originally Posted by neomut View Post
Hi all,

Just about to put the JKU on https://www.sbroffroad.com.au/Suspen...-Falcon-Shocks

I also want to run some 35x12,5R17.

However, I've noticed the falcon shocks with this kit, come with a comment saying must have 4.5bs or less.

I was going to run, AEV pintlers, so theyre out. So no I am looking at the popular 17x9 -6 offset (close enough). However, now I am pushed out a fair old way.

couple of queries from anyone in the know, or running something similar.

(1) with the 17x9 n6 with 35s (12.5), what flares are people running to keep them under.

(2) Anyone who runs the above hit, or has the 3.2/3.3 falcons. What wheel/tyre/flare combo are you running?

Cheers
Jason