AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - JK: Budget CRD build
View Single Post
  #2  
Old 04-01-2018
Hoasco's Avatar
Hoasco  Hoasco is offline
Senior Newbie
 
Join Date: Nov 2017
Location: Brisbane
Posts: 54
Likes: 2
Liked 8 Times in 8 Posts
Check out my Ride(s)
Default

Stock horns are crap, chucked these Stebel horns on to make it a bit louder.



Also made some quick disconnects for the front swaybar. Used some eye nuts, threaded rod and lynch pins.



I took the thread down on the section that slips into the sway bar end, but it has a little to much play for my liking. If I can find some 12mm rod at the scrap yard, I will run a thread onto it to fit the eye nut. Should be a snug fit on the sway bar that way.
Likes: (1)

Last edited by Hoasco; 10-01-2018 at 08:10 AM.