AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - JK: Budget CRD build
View Single Post
  #3  
Old 06-01-2018
Hoasco's Avatar
Hoasco  Hoasco is offline
Senior Newbie
 
Join Date: Nov 2017
Location: Brisbane
Posts: 52
Likes: 2
Liked 7 Times in 7 Posts
Check out my Ride(s)
Default

Remade the sway bar pins.



Took it around my mates workshop last night so he could set the diff gears up. Got the front sleeves welded in.



Spent around 3 hours trying to get the backlash correct on the front and it just wasn't working. We would adjust it one direction and the backlash would come back the other way, or move further than it should in the correct direction. Turns out when I broke the old R&P I also bent the carrier, about 45 thou out on one side. Hopefully bolting the crown down to the carrier hasn't damaged it. Time to go find a new carrier.

Last edited by Hoasco; 10-01-2018 at 08:12 AM.