AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - What gear do you tow in?
View Single Post
  #9  
Old 12-05-2018
SnakeDoctor  SnakeDoctor is offline
Full Flexer
 
Join Date: Feb 2011
Posts: 575
Likes: 137
Liked 125 Times in 103 Posts
Check out my Ride(s)
Default

Quote:
Originally Posted by 2bad4u View Post
I wouldn't call it an old wives tale. The benefits of towing in a 1:1 ratio are well documented. Sure you might use more fuel but the stress put on your driveline is decreased and transmission temps are usually lower.

I'll do my own testing once I get the chance but was hoping someone could give me their findings, especially with ATF temps.
When I was towing a 2 tonne Jayco up from Sydney to Coffs Harbour I did a bit of checking, transmission temps increased inline with the RPM increase when I tested manually selecting 6th.

I can't recall the exact numbers, it wasn't a big deal either way though. Neither was concerning.

If I remember right, the manual suggests manually selecting a lower gear if required to avoid hunting. Strongly recommend reviewing this if you haven't already.
__________________
MY15 GC CRDSTU lift, Mopar rock rails, underbody protection. Chief sump guard, hooks.