AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - how to swap out front coil springs
View Single Post
Old 02-01-2018
junglejuice's Avatar
junglejuice  junglejuice is offline
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 46
Posts: 10,545
Likes: 355
Liked 1,091 Times in 680 Posts

If you loosen all the control arms, disconnect the panhard rod and disconnect the lower control arms (one side at a time, the side you're working on) then you won't need spring compressors, I use a trolley jack under the diff and the OEM bottle jack to wind the diff into the correct spot (usually from the rear of the diff to the chassis) and it all goes together pretty easy and controlled, forget the spring compressors....
10'000 Club

Do it once, Do it right!

95/97 hybrid
IRO/OME/JK 2" lift
ARB bar
Likes: (2)
Sponsored Posts