The reason for going with new injectors are primarily that at wide open throttle it was running a bit lean(but not lean enough to ping), oxy voltage was .7-.75 volts whereas for max power I should be looking at .85-9 volts.
other reasons were that the injectors in there are 15years old and to get then cleaned was going to cost about $150, and if one still doesn't flow correctly after cleaning then it was going to be more than $200. and will more than likely still not get .85-9 volts @WOT.
Also there is the better fuel economy that is expected with the newer design of injector.
Mods on the engine are; late model intake, extractors, 21/2" straight through exhaust, 62mm throttle body, and airflow snorkel. 1995, OBD1.
__________________
Obd1 scanner.
'95 sport,4.6 stroker, 4.5" lift, 32"s, 4:10's, 8.25&SYE, taurus fan
Last edited by rainman; 28-01-2010 at 09:10 PM.
|