Quote:
Originally Posted by Gildo
Also check the condition of the connector on the switch loose/arced connectors on the plug can do this too, it usually heats up and melts parts of the plug or switch.
There's also plenty of other connections between the plug and the relays and lamps.
|
Indeed that is what I thought also, I suspect a relay however after rechecking the tail lamps, wiring harness and connector for a short/wire fracture everything is now operating as it should, intermittent faults are the worst
Quote:
Originally Posted by junglejuice
Sounds like a good time to do an upgrade.....
|
Exactly however...
Quote:
Originally Posted by tazwegion
the loading has been removed from this switch by a lighting relay modification including the use of circuit breakers.
|