AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Everything 2.7 CRD
View Single Post
  #1  
Old 30-04-2013
drover's Avatar
drover  drover is offline
MonsterMoose
 
Join Date: Apr 2005
Location: QLD
Age: 70
Posts: 8,847
Likes: 4,393
Liked 3,929 Times in 2,319 Posts
Default Everything 2.7 CRD

NOTE: I finalised this thread back in 2015 so please don't message me about it as I have moved on and don't follow tyhe information...

This thread is the updated version of WG CRD Filters. As before your input is most welcome but
Use the thread "2.7 Drivers" http://www.ausjeepoffroad.com/forum/...d.php?t=124984 as a chat thread for " Everything 2.7".

This thread is a data thread...................................

Whilst all care has been taken to confirm these numbers the onus is on you to double check.
An * means I use them myself.


Specs and ID's:

Engine: 2.7lt 5 cyl 20valve CRD....WG............ Jeep: ENF .................MB: OM647

Transmission: 5 speed auto............... Jeep: DGJ .....W5J400 ...........MB: 722.6 ...... W5A580

This thread will pertain to those parts that are unique to the 2.7, which means basically Engine and Transmission most other bits are common on other Grands, references will try to show Jeep and MB part numbers, always try to cross reference as this model does have some Jeep part numbers of it's own that will not match common parts on other Grands or similar engines in other MB vehicles. The 2.7 engine does have other variations in MB vehicles the OM612 is similar but some bits aren't, many sensors are common on MB engines including the 3lt CRD so good research is crucial.

It is wise to source a build sheet for your vehicle, it will list every item fitted.
__________________
2015 WK2 CRD Laredo( ZG, WG 2.7 )

Your Never Too Old To Learn Something Stupid.

Last edited by drover; 07-08-2019 at 01:37 PM.