Quote:
Originally Posted by LuluBelle
Ok Lenny this might sound far out but it happened to me off the injector harness there is wires running down to you upstream O2 sensor if they are not in the correct position they can melt on the exhaust manifold and short blowing a fuse in the PDC? the big fuse box under the bonnet and no go?
Otherwise check all your sensors for a 5 volt circuit But that happened to me and took me ages to figure out
Good Luck
_____ooooo
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
|
All is good there just checked, I'm in the garage with the jeep now!