Quote:
Originally Posted by JeanLuke
Thanks for that. The IRO track bar only suits a CRD RHD with 4" lift, if I remember correctly. Might be a little problem.
|
Just to reconfirm. I got this from the IRO Website:
Can be used on the axle side of an XJ/ZJ/TJ/WJ by drilling out the hole and installing a 12mm bolt and nut. Will also fit competitor track bars with an inside diameter of 1.510, a width of 1.250, and radiused or chamfered inside corners (can be chamfered manually during installation). Allen wrench included for installation.
And here is the detailed installation instructions link:
https://www.ironrockoffroad.com/Merc...structions.pdf
One side is about 50 Aussie Dollar (39 US Dollar) plus about 30 - 40 Dollar sending. I was ordering them together with my Ball Joints so not really sure.
BTW: I will most likely order some more from their site (flex joints of A-Arm as well as rear ball joints plus some other stuff... will find that out on the weekend) so if you are interested, we can do that together and share the sending cost.
Thanks
Joerg