AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - ATF+4 substitute fluid
View Single Post
  #14  
Old 22-05-2012
JeepCrazy's Avatar
JeepCrazy  JeepCrazy is offline
Established Member
 
Join Date: Feb 2011
Location: Melbourne
Posts: 188
Likes: 3
Liked 1 Time in 1 Post
Default

ended up using the Nulon full synthetic ATF+4 compatible transmission fluid.

However, I experiencing a issue in the transmission of a a delayed start.

It's only in the morning when I take off from my house to approach the main road (20m) to stop and sitting there for 5 -10 seconds. when I push the accelerator to turn into the road, the car doesn't take off immidiatly, only after a second or two.

what is your thought on this? the transmission does not loose any fluid and the dipstick shows correct level of fluid. I will try to top up a bit, to see if it does make any difference.

Alternatevly I will buy the MOPAR ATF+4, don't know if I should flush the box again and replace filter, or if I can use a pump to suck out the fluid and replace it with the MOPAR one. I know that mixing fluids is not ideal but Nulon and Mopar suppose to be compatibel.
__________________
/l , l [____],
l---l----L -OlllllllO-
()_) ()_)------)_)