Quote:
Originally Posted by awg
I wrote this guide about 1yr ago when I did mine, the universals have slight variation in wiring and Chinglish instructions
its in where the old circuit board was, pre-update, wiring harness jammed up into roof space, works great
http://www.ausjeepoffroad.com/forum/...ghlight=remote |
Great write up, I'm thinking I'll splice the new remote tail into the loom, just near the connectors under the dash that way I can hook into parkers and horn.
I might add I'm also putting in the OE, overhead console so I have to replace that loom up the A pillar anyway.