AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Pre update fuel tank into 01 update
View Single Post
  #1  
Old 10-02-2018
Monstermk2  Monstermk2 is offline
CrawlerStar
 
Join Date: Jan 2014
Posts: 251
Likes: 3
Liked 18 Times in 16 Posts
Default Pre update fuel tank into 01 update

Almost finished doing my change over from the pre update we had to the 01 update , and now for the fuel tank , it’s a 160ltr custom duel sided long range , was made for my old 97 pre update ,

Before I start trial and error testing , pump wise , the 01 has an intank filter instead of a inline filter , so in theory I should be able to just fit up a inline filter and hook in the old pump , ‘plugs are the same’ as they are both obd2
,

Now my question, can i throw a Walbro pump in , or is there something specific that a xj pump needs to be able to do that would throw out the way it runs , my impression is that so long as they can deliver enough fuel and hold the 49psi to the rail it should be fine ,

Hopefully someone here might of done something similar