AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - 2.7crd stall after 10 minutes drive
Thread: 2.7crd stall after 10 minutes drive
View Single Post
  #1  
Old 19-07-2018
freerider170  freerider170 is offline
Established Member
  
Join Date: Nov 2017
Location: near townsville in the bush
Posts: 210
Likes: 2
Liked 33 Times in 27 Posts
Check out my Ride(s)
Default 2.7crd stall after 10 minutes drive
the car started easy in the morning, i drove it to work and 10 minutes later it stall on the highway and start straight after just with the rolling movement, the mil came on(P0190),i was able to get to work without problem. after work it started easy as well, and 10 minutes later on the highway it stall but totally due to traffic jam(got stuck on the right lane for 5 minutes) then it started again, then stall again. then started and i was able to drive home(it did stall one more time in a round about).i don't really know what is it.
i know P0190 is the Fuel Rail Pressure Sensor A Circuit. any help.
what voltage should a get on the fuel rail pressure sensor plug?
this is my daily driver, i really need it...(taking the gf car tomorrow)
thanks.