Quote:
Originally Posted by chris0375
Is it just for the fairlead? Or the whole winch?
|
It's the bottom 2 of the 4 bolts that go through the front of the bar, into the winch and hold the winch in place.
Quote:
Originally Posted by Wazza D
No! You must use at least 8.8!
This is all part of the load certification. In fact, I binned my 8.8 bolts and went 10.9.
|
In case it changes anything, they also have 3 lines in a Y shape, which according to a chart I was looking at makes them grade 5, which seems to have a similar rating to 8.8....
Keen to be sure as not sure where I'm going to find 2 M10 bolts of 40-45mm length rated 8.8, bunnings doesn't seem to have any.
Cheers