AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - 2012 WK2: Oil Change Alert not clearing
Thread: 2012 WK2: Oil Change Alert not clearing
View Single Post
  #2  
Old 13-12-2022
FARWEST's Avatar
FARWEST  FARWEST is offline
Rock Munki
  
Join Date: Aug 2022
Location: West Coast SA
Posts: 2,373
Likes: 2,145
Liked 1,311 Times in 753 Posts
Default
Page 177 of Owners Manual...the three pump method doesnt work.

1) Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (Do not start the engine)
2) Fully depress the accelator pedal and keep it fully depressed for at least 30 seconds.
3) Press and release the brake pedal six times while holding the accelarator pedal pressed.
4) Perform one ignition OFF-ON cycle, start the engine and verify that the reminder has been reset.

NOTE:
If the indicator message illuminates when start the vehicle, the oil change indicator system did not reset. If neccessary, repeat this procedure.




Straight from page 177 of Owners Manual . 2012 MY13 3.O Lt CRD.
__________________
WK2 MY13 CRD LIMITED

Only dumb people think their smart...rest of us learn everyday
Likes: (1)