AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand - View Single Post - Hissing noise - Jeep Wrangler JK.
View Single Post
  #23  
Old 16-05-2018
Hayesio's Avatar
Hayesio  Hayesio is offline
CrawlerStar
 
Join Date: Mar 2014
Location: Beechworth, Victoria
Posts: 402
Likes: 8
Liked 136 Times in 81 Posts
Default

Why don't you try unbolting the slave cylinder (just let it hang there) and pull the leaver right back (maybe use some tape to hold it), then start the jeep and see if the noise is still there.

What this would do is pulling the release bearing off the clutch spring altogether so it wont spin at all. That would be a pretty conclusive test. Just be careful the leave doesn't fall of the pivot ball, and do not press the clutch peddle - that will pop the piston out.
Likes: (1)