Fault codes
I have read on WJJeeps that you can check the fault codes on GC's by turning the ignition on & off 3 or 4 times then giving the fault codes should there be any, which I did, but it didnt show any codes.
I also did the A/C codes. which came back with codes 52, 54 & 56, which according to WJJepps are:
AI (Recirc) door travel range too large
Left temperature door travel too large
Right temperature door travel too large
So from this can it assumed there is a blend door issue? any help as always is appreciated.
Cheers
Chris
|