Bump stop gap
Hello all.
I have a 2011 Wrangler 2.8 l diesel unlimited , I have fitted a 2.5 inch teraflex lift kit to it.Driving over speed bumps (very slowly) it feels like the front bump stops are hitting the front axle ,the gap is about one inch ,maybe slightly under, the people I bought the kit off said about 1.5 inches is normal ,this does not seem enough gap to let the shockers do their work properly but I am far far from being an expert , I hope someone on this forum can let me know what the gap should be .
Cheers all
Last edited by Yenistar; 22-03-2019 at 02:26 PM.
|