DashCommand and OBD2
I got an OBD2 scanner for my 2012 Limited CRD and decided to buy the DashCommand app for iOS. Did all the setup as recommended and it seems to work fine and scan most parameters.
However, I cannot get it to display speed, which then has the effect that instantaneous and average fuel consumption does not show either. It does show fuel flow in litres/hour fine. Is there anyone with similar problems, or with a possible solution?
I have sent an email to tech support and tried the steps they recommended but no luck. Sent off another email and will see what happens.
Sent from my iPad using Tapatalk
|