Taillight Boxes

[ginjaninja]

Where do I buy them, I am sick of replacing taillights

Or can they be easily made?

[darksidecustoms]

JCR Offroad have some nice ones, but you will need to add some auxiliary reverse lights to keep things legal.

http://www.jcroffroad.com/Merchant2/...y_Code=XJArmor

[iwantawrangler]

Rustys offroad sell em for like $100 plus post, or just make them

[JASE68]

Originally Posted by ginjaninja

Where do I buy them, I am sick of replacing taillights

Or can they be easily made?

I replaced 2 in 4 weeks!!!!! geez I want armored tail lights too!!!!!!

[Burmonster]

oh i might have a go at makeing some of these (http://www.jcroffroad.com/Merchant2/...y_Code=XJArmor), with the light boxes. should be fairly easy, just cut and fold some 2mm steel and bolt it on. i think the JCB 1s are 4.5mm but that sounds way overkill and way to heavy (is my conversion right, 3/16=4.5mm??). ill try take some photos and measurements for yall if we got some plate at the workshop.
wat place would sell some LED lights cheap for this?? i would prob want to use 3 lights, a tail/brake, a blinker and a reverse.
burmonster

[rainman]

this is part of my own research don't know for sure if the rings will fit on the housing.

reflector ring $4ea
http://www.shop.benlorv.com/index.ph...&productId=135

red with white ring $35 ea
http://www.maxxima.com/products/prod...ght/view/.html

housings $100
http://rustysoffroad.com/mm5/merchan...gory_Code=BODY

4" round led amber clear lens 2 for $60 deliverd
http://www.ebay.com.au/itm/4-Clear-A...item3f0ce98ee6


Alternativley this size might be able to be made to work:
Maxxima M09400 = http://www.ebay.com.au/itm/140496068894

2" amber lights
http://www.ebay.com.au/itm/2-Clear-A...item3f0c0b2917

Other options
http://www.ironsmithmachine.com/truxled.htm

[murray]

Originally Posted by Burmonster

oh i might have a go at makeing some of these (http://www.jcroffroad.com/Merchant2/...y_Code=XJArmor), with the light boxes. should be fairly easy, just cut and fold some 2mm steel and bolt it on. i think the JCB 1s are 4.5mm but that sounds way overkill and way to heavy (is my conversion right, 3/16=4.5mm??). ill try take some photos and measurements for yall if we got some plate at the workshop.
wat place would sell some LED lights cheap for this?? i would prob want to use 3 lights, a tail/brake, a blinker and a reverse.
burmonster

the side plates are 5mm thats our 3/16
the tail light covers are 3mm thats the 1/8 size