2006 wh 3.0 - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > XH Commander and WH Grand Cherokee
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #1  
Old 11-10-2019
Scott Gorham  Scott Gorham is offline
I just registered
 
Join Date: Mar 2017
Posts: 4
What Jeep do I drive?: WH
Likes: 0
Liked 0 Times in 0 Posts
Smile 2006 wh 3.0

Hi Lads,
I have a code PO341 come up! Scanned and came up Cam angle sensor? Have replaced this previously!Thoughts?
Also the ESP light will flash intermittently sending the car into a neutral drive situation. Not much fun when towing my van Once you back off the gas the car will pick itself back up and continue for hours without a problem. Any ideas/ thoughts appreciated.
Love the Jeep life even if it has the occasional niggle!
  #2  
Old 11-10-2019
Clarky's Avatar
Clarky  Clarky is offline
Irok Bandit
 
Join Date: Apr 2012
Location: Wang NSW
Age: 56
Posts: 4,434
What Jeep do I drive?: JT
Likes: 479
Liked 1,190 Times in 789 Posts
Check out my Ride(s)
Default

What did you use to scan it with?
__________________
SOLD 06 Limited G/C QuadraDrive II Lovells 2"Lift +30 rims 265/70/17 Imported Saguaro Bar Stedi
  #3  
Old 11-10-2019
Scott Gorham  Scott Gorham is offline
I just registered
 
Join Date: Mar 2017
Posts: 4
What Jeep do I drive?: WH
Likes: 0
Liked 0 Times in 0 Posts
Default

Hi Clarky,
Thanks for your response!
I have a Autel Maxiscan OBDII
Cheers!
  #4  
Old 13-10-2019
Hellcat  Hellcat is offline
Senior Newbie
 
Join Date: Apr 2008
Posts: 84
What Jeep do I drive?: FSJ
Likes: 8
Liked 11 Times in 7 Posts
Default

What brand is the new camshaft position sensor? Perhaps its not particularly good or maybe the plug has poor connectivity.

I haven't had any issues with mine but I would have thought intermittent failure would cause the car to stall.
  #5  
Old 13-10-2019
Clarky's Avatar
Clarky  Clarky is offline
Irok Bandit
 
Join Date: Apr 2012
Location: Wang NSW
Age: 56
Posts: 4,434
What Jeep do I drive?: JT
Likes: 479
Liked 1,190 Times in 789 Posts
Check out my Ride(s)
Default

I'm not familiar with the Autel but I do know these jeeps can be fussy with OBD readers and can get false readings on some and most can't read Chrysler specific codes.

You can try these or go to a workshop with a (factory) StarScan reader

https://www.bluedriver.com/

https://appcar-diagfca.com/en/

https://www.autoenginuity.com/ (what I have)

What part of the world are you in? we may be able to recommend someone with the scanner.
__________________
SOLD 06 Limited G/C QuadraDrive II Lovells 2"Lift +30 rims 265/70/17 Imported Saguaro Bar Stedi
  #6  
Old 14-10-2019
Scott Gorham  Scott Gorham is offline
I just registered
 
Join Date: Mar 2017
Posts: 4
What Jeep do I drive?: WH
Likes: 0
Liked 0 Times in 0 Posts
Default

Thanks Guys,
Hellcat,I'll have a look at the CPS plug, and see how we go with that!
Clarky, i'm in Perth, so will look for another scanner/Purchase of a "better"
scanner.

Cheers!
  #7  
Old 14-10-2019
Classic Boy's Avatar
Classic Boy  Classic Boy is offline
Full Flexer
 
Join Date: Jun 2017
Location: Central Vic
Posts: 803
What Jeep do I drive?: WG
Likes: 23
Liked 290 Times in 211 Posts
Default

Autel scanners can deal with almost every make on the road. Mopar codes are no problem for them.
I agree with the synopsis about checking the plug pins.
Also some aftermarket sensors can be problematic.
Post New Thread  Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On





All times are GMT +10. The time now is 03:01 AM.


Advertisements




AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=