I'd like to know too. The guy at ARB implied that the Magnum would fit their bar, I assumed that would apply to the Mopar one as well (since that's the one I'm planning to install).
I think you are right that the mounting bolts are ok as they have the same stud pattern. What i'm wondering though is the control box and motor housing. As the mopar bar has a top loop on it the control box is probably going to need relocating to the motor housing. For that to happen the motor housing needs rotating so the control box can bolt onto it. There are fixings for it so that isn't a problem. The issue seems to be by rotating the motor housing roughly 180 degrees does it has enough clearance underneath due to some protruding nuts?
the control box isnt attached to the winch, its loose.
you will need to find your own way to attach it to the winch, or buy a separate bracket to attach it to the winch.
no need to rotate the motor, just mount it behind the winch if you think its an issue (which i dont really think it will be if you look at these winches on the same bar)
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
Magnum 9k winch on Mopar front bar?
