|
|
13-06-2016
|
|
Trail Twister
|
|
Join Date: Jun 2014
Location: Sydney northern beaches
Posts: 1,192 What Jeep do I drive?: XJ
Likes: 2,426
Liked 840 Times in 479 Posts
|
|
As per "Go Jeep" it sits under the radiator.
__________________
Go hard. You can rest when you die
"98 XJ. RE 3.5 inch lift. Dana 44. 4.11's. 32's
|
13-06-2016
|
|
AJOR Gold
|
|
Join Date: Nov 2012
Location: Perth
Posts: 1,465 What Jeep do I drive?: XJ
Likes: 1,064
Liked 1,080 Times in 692 Posts
|
|
Quote:
Originally Posted by werd
So the oil cooler is getting its cool air through the aircon and the radiator?
|
Its a bit hard to see the exact location in my pics as i have the bullbar on, but i have borrowed this pic from Marcus's site http://www.go.jeep-xj.info/HowtoAutoCooler.htm to show exactly how he did it, and what i also did, based on his idea. Pic below is of holes in bull bar. Derale sits just behind those...
Thats why i have drilled a bunch of 40mm holes in my bullbar and the plate behind it to get more airflow.
Cheers,
__________________
'95 XJ I6 4.0 AW4 NP242,
Last edited by alexbrown64; 22-03-2018 at 08:02 PM.
|
13-06-2016
|
|
AJOR Gold
|
|
Join Date: Nov 2012
Location: Perth
Posts: 1,465 What Jeep do I drive?: XJ
Likes: 1,064
Liked 1,080 Times in 692 Posts
|
|
My factory headers were cracked and would not pass an inspection. In preparation for the new headers, i removed the factory down pipe. The factory down pipe has a restrictive dent in it that many think has happened while off roading. In fact, it was put there by the factory to help clear the front drive shaft. Its a terrible design that restricts a narrow pipe even further. My wildcat headers come with a dual down pipe that has no restrictions and less bends. While the headers are getting ceramic coated, i painted the down pipes with 1000C ceramic high temp paint inside and out. If you cure it correctly, it should last.
Cheers,
__________________
'95 XJ I6 4.0 AW4 NP242,
Last edited by alexbrown64; 22-03-2018 at 08:03 PM.
|
15-06-2016
|
|
AJOR Gold
|
|
Join Date: Nov 2012
Location: Perth
Posts: 1,465 What Jeep do I drive?: XJ
Likes: 1,064
Liked 1,080 Times in 692 Posts
|
|
At one stage my brakes were hopeless and i was not going to go ahead with this project until i sorted them. I ordered the EBC Yellow Stuff pads, front caliper rebuild kits and rear cylinders all at the same time. I put the pads on and the difference was a miracle, so i never bothered with all the other stuff. That was up until today. I got down and dirty and covered in brake fluid. Tackled the rear cylinders first. They were pretty old and i could of swore i saw one weeping a while back. These were quite easy, but i had preplanned by getting a handy 3/8 flare nut spanner which really helped.
The fronts took a bit longer as the pods in the calipers were a stuck in. Everything was really dirty and worn. Cleaned everything up, got the pods out and replaced them together with all new seals. My old dust seals were missing, so hopefully this setup will give all the brakes a new lease of life... I used about a liter of brake fluid bleeding everything through. Pedal feels good but i may give them another go after a few drives.
Cheers,
__________________
'95 XJ I6 4.0 AW4 NP242,
Last edited by alexbrown64; 22-03-2018 at 08:05 PM.
|
20-06-2016
|
|
AJOR Gold
|
|
Join Date: Nov 2012
Location: Perth
Posts: 1,465 What Jeep do I drive?: XJ
Likes: 1,064
Liked 1,080 Times in 692 Posts
|
|
Cleaned everything up and re-installed the cylinder head with new bolts. Torqued everything 3 times and in the pattern that the fsm requires.
As my rocker cover is 21 years old and is the alloy type, it comes with a permanent gasket that the fsm says can be repaired with rtv within reason, or if its beyond repair.. replace rocker cover. That's not going to happen and there is an alternative. My gasket was shot, but Felpro provides a gasket as a replacement for this model.. Its not cheap, at twice the price of the head gasket, but its great quality. Fel-Pro VS 50522 T.
I also had a chance to pick up the Wildcat headers that had been ceramic coated.
Below is a pic of the old OEM headers, which are cracked, vs the new tri y design Wildcat headers with ceramic coat to reduce underhood temps, improve performance and protect the headers from rust. Going to fit these tomorrow. Have everything ready including 14mm ratchet spanner.
Cheers,
__________________
'95 XJ I6 4.0 AW4 NP242,
Last edited by alexbrown64; 22-03-2018 at 08:07 PM.
|
20-06-2016
|
|
MonsterMoose
|
|
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 52
Posts: 10,544 What Jeep do I drive?: WK2
Likes: 369
Liked 1,110 Times in 691 Posts
|
|
The 14mm ratchet spanner makes things easier, I also have ceramic coated extractors, never noticed any difference temp wise compared to the stock manifold...
__________________
JJ
Do it once, Do it right!
2014 WK2 Overland
|
23-06-2016
|
|
AJOR Gold
|
|
Join Date: Nov 2012
Location: Perth
Posts: 1,465 What Jeep do I drive?: XJ
Likes: 1,064
Liked 1,080 Times in 692 Posts
|
|
I was a bit apprehensive about re-fitting the inlet and exhaust manifolds. I knew it was going to be a hard time, and the Jeep didn't let me down.
I was well prepared with the 14mm ratchet spanner, copper rtv, removed the front drive shaft to give me more room.. Below is a pic of the progress... it was all going so well...
and then i snapped the rear stud when tightening everything up. Its 3/8 and snapped 2 threads inside the head right at the back near the firewall. I have now read thats its common. I was gutted. Took everything back off, ordered and got a new manifold gasket within 3 hours from Coventrys, got two 3/8 manifold bolts from Repco, and a right hand drill adaptor and cobalt drill bit from Masters.
I managed to get my drill in the stud and make a 3.5mm hole and then tried getting it out with a bolt extractor. 7pm and no luck so far.
I plan on drilling bigger and using a bigger extractor, and then may have to go up to 8mm and rethread. This is a major problem, and i don't want to have to remove the head again...
Cheers,
__________________
'95 XJ I6 4.0 AW4 NP242,
Last edited by alexbrown64; 22-03-2018 at 08:09 PM.
|
Thread Tools |
Search this Thread |
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT +10. The time now is 04:33 AM.
|
|
|
|
Advertisements
|
|
|
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
|