Quote:
Originally Posted by Fouros
well i fitted a set to the KJ
used the KJ front strut and the Dodge Durango rear and i gota say they are brilliant
you wont get the rears from Australia they are a US import only
RS999764 front strut
and the
RS999248 rear
here are the details for those interested
RSX17004
Upper mount: LS28
Lower mount: LS28
Compressed length: 15.375"
Extended length: 24.625"
Travel: 9.250"
RS999248
Upper mount: LS28
Lower mount: LS28
Compressed length: 15.125"
Extended length: 24.000"
Travel: 8.875"
Body diameter: 2.18"
just waiting for my MYRIDE wireless controller to turn up
|
4wd 1 stock the RS999256 which has the same specs, not sure whqt the difference is new model maybe? Which is where I got mine.
I would suggest that you get some second hand solid sleeves from a suspension place and drill them out to 12mm then cut them to length. Use your oem shocks if you still have them to get the length. I found that the crappy folded steel sleeves are two thin and end up grinding out the holes in the mounts. I know they supply some washes for spaces but they just dont do the job properly.
The biggest problem is you have to face the adjustment knob forward so it gets a pounding from gravel when offroad and when you hit the rocks well then you really got to look out.
One of the other good things about them is they are a twin wall design so they are a bit more protected from being bashed by rocks.
I hope it all goes well for you.