Injector 4 removal 2006 crd 2.8ltr
Hey all,
I keep getting a p0204 code but it doesn't through the check light.
Tested it all with a noid and wiring is fine so it seems it's the injector.
New one on its way but I wanted to remove the original to have a look see and a clean just in case.
With regards to the heater hoses above the engine, is there coolant in there and all the time. Do I need to drain before removing these to give me access to number 4?
Also, has anyone moved the wiring harness on top of the engine. Is there a way to disconnect or free up some much needed space up there for the injector?
Cheers
Chris
|