Quote:
Originally Posted by alexbrown64
Ive been looking at upgrading the headlights as well to LED, which are great, but i also want to be AU compliant. Not trying to sound like a dick,but all aussie headlights meet adr's by having that dip built in so you dont blind the oncoming trafffic on the right. I think its bullshit, because a rabbit wouldnt be able to see an XJ coming down the road with those yellow candlesticks.
But, if a cops coming the other way and you give him a bit too much light, it may attract their attention.
What did you do to resolve this issue Atomik? Just adjust both headlights down to a reasonable level?
Interested to see where this thread goes. I think all these LED headlights are safer and much better, newer tech, but also a small concern about the compliance issue.
Cheers,
|
cant say i had that issue......adjusted the beams against a wall i regularly use for that purpose....they actually didnt need much adjustment at all....made sure the beam wasnt too high, had no left or right issues....then went for a drive around some parked cars to make sure they were'nt glaring high into the vehicle ahead cabin...couple of months later now, havent had any flashes from oncoming vehicles. Only thing I can fault is the high beam aint super, but the low beam is miles better than the halogen.
Prior to fitting these, I was using H4 LED globes in the standard glass lamp and was always getting flashed.