Did an oil change on 2007 3.0L crd yesterday and am now getting the low pressure warning light, Light started coming on and off at idle and now on all the time at idle until I give it a few revs and after a drive light on all the time. Just about to change filter and o rings with a mann filter and new oil.
Oil cap and attachment look OK, but I would like to check if pressure switch is working but cannot find it. Have attached photo if someone could tell me which one. Scanner doesn't come up with any codes except low oil pressure. Research says might be something blocking sensor.
If there was a litre to much oil could this give a low pressure light.
Any help would be great.