JK: The Rubicon project supported by 4WDUSA

[Jeeptheone]

madog,

What did you do to get your steering stabiliser to sit higher up and on the other side of the vehicle???

JTO

[azasjeep]

Originally Posted by madog

Go ARB87U, throw your toys out of your cot. You obviously have issues with 4WDUSA, please take it up with them.

Best Regard

DoNotGiveAshitDepartment.

I dont think he has a problem but i guess like me he figures with a 5 page add like this they could throw the forum a few bucks and sponsor the site.

[Maz]

Originally Posted by ARB87U

maybe you could suggest to 4WDUSA that they support the AJOR forum, your post is one giant bloody advertisement. Could you have referenced them or gotten more plugs into your posts?

i know they did the work, and kudos, but they don't support this forum. As such we should not support them.....

It poses a good question. Did 4wdUSA give you a really good deal to plug them on here or are you just really happy with the service you got from them?

[madog]

Originally Posted by Maz

It poses a good question. Did 4wdUSA give you a really good deal to plug them on here or are you just really happy with the service you got from them?

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog

[madog]

Originally Posted by Jeeptheone

madog,

What did you do to get your steering stabiliser to sit higher up and on the other side of the vehicle???

JTO

Hi Jeeptheone

The stabaliser is currently in a temporary postion until the new 4" right-hand drive pitman arm arrives. The arm will be specialy designed to accomodate the steering stabaliser which will go from the pitman arm to the passenger side chasis. This will put the stabaliser higher up to the right and behind the front bumper away from all other moving parts. The stabaliser mounted as in my picture is practical for road use but will get knocked by the panard bracket when the Jeep bottoms out as I have found out. There is still more work I want to have done on the Jeep but that will be posted else where.

I hope that answers your question, Regards
Madog

[azasjeep]

Originally Posted by madog

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog

no arguament dude, keep updating the thread its a top jeep you have built.

[Maz]

Originally Posted by madog

"yes, happy with the service I got from them". But it is not about them,it could have been anyone who done the job right by me on my vehicle and I would have still said what I said on this thread. I am just self impressed with the JK comparing it to how it performed stock and the capabilty it has now. 4wdUSA have no knowlege of my thread or any self input/plug into my postings. When I said in my post about the Perth show, it was not to premote 4WDUSA but that my vehicle would be on display there. azasjeep, you pose a good view to the argument and I will put it to 4wdUSA about AJOR sponsorship. My intensions are clean and all I wanted to do was post my Jeep under "Jeep Build Up" and show Oz what people are doing with the stock Jk's. Obviously I have put a few people noses out of joint as with the title to my thread, so I will answer one last post and then resign myself from this thread.

Regards
Madog

No need to resign yourself from the thread. Its a great read and well done on your buildup. It's a great rig.

ARB87U bought the question up and you have explained your situation well. Cant ask for more than that.