Cherokee Owners post your PIC!!

[Tims_Jeep]

Originally Posted by Chopper in Oz

Okay, the humble "Mummy's Jeep"


Before the little lift..

Believe it or not it actualy did come up around 40mm at the front and 50 at the rear.

(i'd post a pic of the 'other' car in the yard, but that would be uncool here )

so it's not wild, it still gets us out and about on occasion, and every now and then we take out both 4bys for a run.

I still have a plan to tidy up the bull bar/flare situation... one day

What front bar is that? Looks like an ARB winch bar with the top cut off? Looks cool.

[Chopper in Oz]

Originally Posted by Tims_Jeep

What front bar is that? Looks like an ARB winch bar with the top cut off? Looks cool.

you are spot on.

Our good friends at Jeeprecyclers,had one that the previous owner had put on its roof and bent the top tubes.

I picked it up, organised some new mounts, chopped off the bars, had it powdercoated... total cost was probably $250...

I was very happy with the result, but would really like to tidy up where it should meet the flare.

cheers

[black xj]

just some pics of the jeep 1. as a daily driver and 2. as a weekend warrior

[HybridXj]

Originally Posted by mowerman

Plenty of flex there, did you make the bar work yourself?

Hi mate, yes I did the barwork. I made it from an old GQ Patrol bar and cut it to peices! I then grafted the original alloy nudge bar to the top. I'll be making up a rear bar one day, once I cut the back off to convert it to a ute. I also made the entire control arm assembly, including the crossmember that it attaches to and the panhard rod and bracing. As you would know..Once you start, it's hard to stop!

[two dogs]

Heres the ol girl with the lift kit in and fully loaded up- pretty stoked with the RE kit-it all worked well- only afew minor adjustments to make but it did pretty well considering the shake down was 3500kms offroad on the cape!(time was not on my side ).

[digsy]

Here is some photos of my freshly finished XJ...
Just gotta do the finishing few bits to it such as finish the wiring and fuel system and it'll be out for intial testing.











just kidding....phat as hell but eh?!

[YankeeDave]

that will be cold in winter mate, and not much room for beer.

but looks nice