Mopar KK Lift Kit

[Vards]

Originally Posted by moon_cherokee

Thx single, it's good for a newbie like me to know that i'm not making a mistake with my choice.

I have had a look at the arb ones, and they seem to offer a limited choice of kit and far from the 3 inch max authorised by rta in nsw.

Stu offers 2.5 inch, pity that it doesn't offer 3 inch, lol .

In 2011 when i was in nsw looking into their regs, it was 150 mm total but only 100 mm suspension lift. You may want to check with the RTA. Keeping it legally registered was my primary concern being on a lease.

[single_single]

Originally Posted by KKnut

He does offer 3" but I won't recommend as its HD and way too firm for my liking even with bar & winch. I changed from this to his standard springs in the front and is so much smoother on the rough stuff. left the HDs in the rear to carry constant heavy loads. Btw, his kits included OME shocks too and IMO they're actually good, but I think he's gone onto Bilsteins now. This subject has also been discussed in detail here:

CRDSTU Lift Kit
http://www.ausjeepoffroad.com/forum/....php?p=1353636

This is how the standard KK Sport looked with the extra 3".

Have to say, ur KK on 3-inch looks even more badass lol...

[KKnut]

Cheers Single, this was almost 2 years ago and before the bar. Now it sits lower at the front when the back isn't loaded. The approach angle isn't as good but the ride is great.

[CibbyDoc]

Hi rebel, not sure what's avail for you one states but if you can get them I would highly recommend the Stu Crd lift kit. Changed out my mopar for it and have not looked backed. Much better ride and clearance.

[moon_cherokee]

Originally Posted by KKnut

This subject has also been discussed in detail here:

CRDSTU Lift Kit
http://www.ausjeepoffroad.com/forum/....php?p=1353636

This is how the standard KK Sport looked with the extra 3".

It looks great! Don't know if it's only me but when i click on the link it takes me to a post about a snorkel.

Thx vards, just checked rta (or rms now) and it states:
"
Fitting of body mountings, a body lift kit or mounting points other than those designed by the vehicle manufacturer.

Example not requiring certification: • Fitting optional body lift kits or mountings that are designed for that make and model of vehicle and meet or exceed manufacturer’s specifications. "

Not sure how to interprate that......

[KKnut]

Originally Posted by moon_cherokee

Don't know if it's only me but when i click on the link it takes me to a post about a snorkel.

Yep, me too! Lol. 😏

[single_single]

Originally Posted by KKnut

He does offer 3" but I won't recommend as its HD and way too firm for my liking even with bar & winch. I changed from this to his standard springs in the front and is so much smoother on the rough stuff. left the HDs in the rear to carry constant heavy loads. Btw, his kits included OME shocks too and IMO they're actually good, but I think he's gone onto Bilsteins now. This subject has also been discussed in detail here:

CRDSTU Lift Kit
http://www.ausjeepoffroad.com/forum/....php?p=1353636

This is how the standard KK Sport looked with the extra 3".

Hey KKnut, does STU still offer a 3" lift kit?

Do u have a quote on that??

Cheers,
Shawn