Well I did it, mine now works from inside my house, the Cherokee has tinted windows as well, and it works from at least 5 plus metres away. As for the plastic rivets I just used my dermal type tool to grind them low enough to lift the board out and when re assembling the unit I used some foam to keep the board in place. A small hole was placed into the casing allowing my antenna wire to come out, when replacing the unit back in, I placed the antenna wire behind some plastic brackets so it is safely tucked away.
Thanks guys the mod was a brilliant one and simple to-boot.
__________________
Why wait for tomorrow, today is a good day, life is to short to do otherwise.
Last edited by nallyrt; 19-11-2010 at 08:10 PM.
|