Triple battery set up..
Managed to get 2 55ah gel cel battery's so I took to boot tray out and put them in the floor
They sat just above the floor line so I had to raise the floor. Did this by using some 35mm laminated pine cut into the shape of the boot making room for the batteries
I managed to get a 200x200 stainless boox which I used to house all the circuit breakers and switches and as a bit of a junction box just trying to keep it simple and tidy, made a bracket to hold it and the ctek dc-dc charger in the boot under the left hand roll bar
I then wired the batteries to the box and charger, carpeted the floor and finished it all off.. Still to add the acc sockets on the other side of the boot and a projecta pure sine wave inverter to go under the charger.. Cheers