Quote:
Originally Posted by Hotdognz
I have the same app, what did you do to get the trans temp working ??
Cheers Stephen.
|
Here you go, only works on pre 2012 though, so the 4 speed auto.
Start torque and on the main screen go to settings and then Manage extra PIDs/Sensors. Here you need to "Add custom PID", there are two you need to add.
This first one wakes up the sensor, you need to add it to the screen on torque but make it tiny and send it to the back as you don't need to see it.
PID = 3e01
Long Name = Whatever you like. I used wakeup
Short Name = Whatever you like. I used wakeup
Equation = A
This one is the actual gauge and you can add it on the screen like any other gauge
PID= 22b010
Long Name = Whatever you like. I used trans
Short Name = Whatever you like. I used Trans
Unit type = C
Equation = A
That should do it
Cheers
Steve