What did you do to your XJ today? 1M Views

[Mudmonster]

finished lining the roof console and fitted it back in.
not a bad job for a first timer.
now just got to do the sunvisors that will be a fun job.

[anthonygubbin]

Originally Posted by layback40

Talk to a bearing supply company. ~ If it was a diesel, I could give you the seal details ~ have posted in another thread.
The 4ltr 6 probably has a very standard seal. Google is your friend!

Genuine, Rockauto or Wooders. I doubt whether a bearing place would carry it as it is a two x half moon seal. I was sent one by mistake when asking for a timing cover seal. I should have asked for a front main as she understood that one.

Regards A

[layback40]

Originally Posted by anthonygubbin

Genuine, Rockauto or Wooders. I doubt whether a bearing place would carry it as it is a two x half moon seal. I was sent one by mistake when asking for a timing cover seal. I should have asked for a front main as she understood that one.

Regards A

Need to ask for ;

BS40612

or

084113730252

Jeep 4.0 is not their only application.

[Crawlerpaul]

Originally Posted by Mudmonster

finished lining the roof console and fitted it back in.
not a bad job for a first timer.
now just got to do the sunvisors that will be a fun job.

Attachment 56448

Attachment 56449

Attachment 56450

Great job mate, like a bought one!!

[Windex]

Removed my old 4 inch springs and put in some new 4.5 inch springs chasing the ride balance I want.

[anthonygubbin]

Originally Posted by layback40

Need to ask for ;

BS40612

or

084113730252

Jeep 4.0 is not their only application.

Does that mean CBC carry the seal? Or is that the genuine part #? I need one, one day. I was told mine was ok and the leak was coming from elsewhere. My trusted old mech was mistaken . He thought the leak was the rocker cover and sump gasket. Even though they were leaking the RM has a weep still . Now, well oneday I need to pull the sump again and do the RM. Anyone know if a rubber sump gasket can be reused? If not then the leak can bloody well stay. Annoying job anyway getting the sump off an on with the front axle in the way. Be a hell of a lot easier if I had adjsutable arms. I find it a pain getting the diff where it needs to be to get the arms back on .

Regards A

[junglejuice]

Originally Posted by Mudmonster

finished lining the roof console and fitted it back in.
not a bad job for a first timer.
now just got to do the sunvisors that will be a fun job.

Attachment 56448

Attachment 56449

Attachment 56450

So when are you coming to do mine???

Looks good mate.....

JJ