What have you done to your JK this week? 2.5M Views

[Bakers4]

They look really good. Did you make those yourself?


Sent from my iPhone using Tapatalk

[PureCaboose]

Originally Posted by Nanook

After being stuffed around with the wrong sized bags I've now got the right ones fitted. Went for Polyair ones so we'll see how they go.

I've also ordered another set of roof racks to add to the ones I have fitted at the rear of the hardtop so I can carry my kayak when I'm not taking the camper trailer with me.

You will want to swap that trailer plug onto the top of the metal tab, it gets ripped off very easily.

[Steve F]

Put my adjustable panhards in, the wheels are now sitting in the same spots in the guards and the Jeep is so much quieter on the road as nothing rubs or binds anymore, feels like a new one, which surprised my a bit.

Just an easy hour to do both ends.

Also replaced the bolts in the front with the correct sized ones and nyloc nuts and not a moment too soon as I could already see a little wear on the mounting holes where the thread of the stock (slightly too small ones) had cut it away.





Cheers
Steve

[Wazza D]

Originally Posted by PureCaboose

You will want to swap that trailer plug onto the top of the metal tab, it gets ripped off very easily.

I agree but what I did was hack my tab completely off and chucked it in the bin.
I then screwed it directly onto the chassis cross section above it.
If you find it too much tucked up behind the bumper to easily access, simply cut a square out of the wifes nylon cutting board. They make great spacer material for that type of thing.

[redrockrubicon]

Yeah cheers, kinda, I cut and bent the pipe and had a mate weld it all up used 2" o.d. high tensile steam pipe about 4.8mm wall thickness , used original Rubicon rails as a platform to work off

[redrockrubicon]

Originally had just tube but decided to go all checker plate in the end

07 Rubicon ,3.5" 4dr aev springs ,aev drop brackets, bilstein shocks, ome steering stabilizer , 98series procomp 17 x 9 wheels, 35" mtz's ,xrc mod front bar,rampage rear bar , custom rock sliders , LPG vapour injection

[Tattooedtank]

Been a while since I've updated what I have done....

37's
RCV's
Dual battery
New hood
Front and rear bars, LED's winches
Compressor
Dual battery
Powerpoints
Air tank
King bump stops going in as we speak
Left pillar pod
LED brake lights
LED head lights
Large boot tub to fit compressor and battery
I'm sure there is more, just can't remember it all.

Bigger disks brakes, braided lines, and booster going on next with some beadlock rims


Sent from my iPhone using Tapatalk