DPF Delete pics and dyno results!

[Cherokee30D]

Haven't noticed the black smoke either.
There is more black inside the exhaust pipes, but not on the bumpers etc.
Lovin it 😊👍

Cheers, Craig

[jesse270]

Put my dpf delete pipe on yesterday. Getting it tuned at ecuwest tomorrow will keep you guys updated.

By the way I am still yet to receive any error codes with the stock tune and dpf pipe.

[jesse270]

Hey guys

Got about 25% hp power gain and 10% torque gain and probably about 10% better on fuel, which I wasn't expecting.

Only Running just over 21psi boost and Egt's remain about the same just under 700deg.

[chocco]

Originally Posted by jesse270

Hey guys

Got about 25% hp power gain and 10% torque gain and probably about 10% better on fuel, which I wasn't expecting.

Only Running just over 21psi boost and Egt's remain about the same just under 700deg.

Hi Jamie

That's good to hear you won't look back.

What are you using to measure you're EGT ? Specifically EGT1 which is the first sensor post turbo located on the dump pipe and not affected by the DPF Delete as mine has stopped working since the DPF Delete.

Have you had the S49 Update ?

Cheers


Sent from my iPhone using Tapatalk

[Cherokee30D]

Six tanks in report.
Since the DPF delete and re-tune, I have covered 5,844 Klm's and used six tanks of fuel, with an average of 7.55 Lt per 100 Klm's.
The six tanks of fuel prior to the DPF delete and re-tune averaged 8.46 Lt per 100 Klm's.
Admittedly, I haven't towed quite as much over the last six tanks.

Either way, I am extremely happy with the massive power & torque..... and the amazing fuel economy.

Thanks again Matt for the work that you have put in creating the DPF pipe etc.

Cheers, Craig

[SnakeDoctor]

Wow awesome results.

I struggled with the tuning up here because of the timing with the S49 update and the newer ECU so hoping can get down there to Melb or there is someone proven in Sydney with the MY15+ models.

[jesse270]

sorry for late reply

Yes I have had the s49 update. The sensor is egt bank 1 sensor 1. The first one. Works fine.

What egts are you guys getting running 30psi?