Provent in a WH

[glend]

Stu I have sent Ginga a PM on this. I'll forward it on to you as well, and BTW I can install these in Sydney (or maybe at Jambo - it does take very long if you have the gear).

[North Coast Wrangler]

I found on another forum that people use a air compressor filter setup as a catch can. Am thinking of using a similar setup myself.

http://www.clubwrx.net/forums/engine...an-25-a-4.html

yes I know it's not a jeep, but the principle is the same.

[loric]

Originally Posted by CRDSTU

Can you post a link as to where to get these units from?

R,
Stu

http://www.westernfilters.com.au/mann_filters.html

I bought from their ebay shop. Cheapest that I could find. Another place is Sydney Filter Service (where i got the KJ one a few years back).

Westernfilters also sell the whole shebang (provent, hoses, clamps etc) as a kit, but i thought $100 for a metre and a bit of silicone hose was a bit steep.

Sorry, no progress yet. The place last night only had 1" heater hose, no oil resistant hoses in that size. Mustn't be a popular bit of kit to sell in Melb CBD?!
Off to Whitworth Marine to see if they have some. (Lots of toys there - I love that place)

[glend]

Whitworths will have the clear reinforced PVC hose that will do the job but it will likely turn yellow and harden up over the years, I've replaced mine twice already but that maybe due to heat that they experience under the Kj engine cover.

[loric]

pics of install

[loric]

more pics (coz i don't used picbook or whatever that's called)

[loric]

Dudes - i've edited my first post with the install.

Seems to work well, looks good, easy install.