Quote:
Originally Posted by ren0vator
Yep 20mm for the offset & 6.5mm for the rim,
but it also depends on backspacing.
Be interesting to see the final result
Driving round corners about to become interesting
Luckily there's not many corners up north
|
I have already test-fitted them and they are surprisingly OK. The driver's side rubs on the inner splash guard at the rear of the front wheel well during turns, but that's only because the rear A/C lines run there and I can't pull the plastic back any further. I have done the pinch weld mod on both sides for the extra clearance, so if it wasn't for the A/C lines it would be sweet. I can see why the hard-wheeling guys in the States remove the rear A/C now.
I do have about 3.25" of lift in the front though with the Murchison strut spacers. I reckon if I was at a true 2" lift it would be scraping a lot worse!