Sorry mate the pic's res has been lowered to able to upload, i didn't realise.
1. the dip stick reads 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 meaning mm of oil in the pan, but each one of those increments from the end of the dipstick are 10mm is 1 15mm is 2, 20mm is 3, 25mm is 4, 30mm is 5, 35mm is 6, 40mm is 7, 45mm is 8, 50mm is 9, 55mm is 10, 60mm is 11, 65mm is 12.
2. Yes i have a scan gauge to check the temp, you could do it but be careful the nag1 is a brilliant trans for not getting hot, it can take a while to get to temp, i live 1 k from a freeway and it don't get to running temp for about 40k. if you could keep it to stop start driving it for 10-15 mins and don't give it grief, if you just drive normal it won't go over running temp which is 75*C.
i hope this helps.
|