Quote:
Originally Posted by layback40
What bolt did you break? was it one of the main bolts or one of the small side ones?
|
It was the front bolt that is right next to the intake/exhaust manifold. I figured out my problem. I was using a ft/lb torque wrench and I made the mistake of thinking that the graduations were lower than NM torque wrenches... I'll check that one as a learning experience.
90 NM is only 66 ft/lb of torque. I was thinking 110 ft/lb was less than 90 Nm... Boy was I wrong.
As far as the injector is concerned, I drove for about 2 hours today, and the injectors are dry. I must have gotten the hole sealed up pretty good.