What did you do to your XJ today? 1M Views

[Richard buttocks]

Originally Posted by bruggz351

I'm so jealous. What did that cost to import???

Oh, btw

Bout 220$ including post
Was a bit worried as it was meant to come via sea
And apparently that can take over 3 months.

Shame about not being able to get new ones with lights
Ive had my American friends searching for one with little luck
Will keep looking but!

[junglejuice]

Originally Posted by Roler

Thanks JJ for helping out with this (who better than)
(the fan has got a blue and black wire running to it, I take it the blue would be the positive). So, could I also disconnect the blue wire and probe its end t with the red multimeter probe (since I dont have a wire-piercing probe on it)?

I just had a quick skim through the 99 fsm, the blue wire is positive and the black is gnd, if you disconnect this wire you can measure the continuity of the fan motor by connecting the red probe to the blue wire running to the fan and the black probe to gnd, you should get a reading on ohms...

I checked my spare fan and it's approx 7ohms.

If you get similar then reconnect the fan, switch the meter to DC volts and measure the voltage at this same point with the A/C on, you should get approx 12v.

If you get stuck let me know, I may be able to have a look at it for you over here...

[vernicious]

Originally Posted by layback40

You guys realize that you are talking 2 different connectors. vernicious is talking #1 diesel injector, Roler is talking #1 petrol injector. Completely different connectors.

Yes, but the basic principal to how the wires are inserted into the plug is the same. It might look a little different, and there might be more wires, but the principle is still the same.

[Roler]

Originally Posted by junglejuice

..
If you get similar then reconnect the fan, switch the meter to DC volts and measure the voltage at this same point with the A/C on, you should get approx 12v......

Thanks. I would have to pierce the wire for this, no?

[wikchi]

AHHH IT OVERHEATED COMING OFF THE BEACH AGAIN!

went up to 105-110 and shut off for 10 min again.

had to let it cool down again.

Wtf

I had it on trails for like 4 hours today but as soon as i go on the beach for 30 mins it shits the bed.

hood vents here we come

it usually sits at 80-95 on the road/trails/mud

[xjdavid]

110 sounds normal. Was it boiling. Shouldn't boil till well into the red.

Sent from my HTC Desire HD A9191 using Tapatalk 2

[Rangers]

Originally Posted by Richard buttocks

Bout 220$ including post
Was a bit worried as it was meant to come via sea
And apparently that can take over 3 months.

Shame about not being able to get new ones with lights
Ive had my American friends searching for one with little luck
Will keep looking but!

Have you got any more pics?