2.7l 2003 WG high pressure fuel pump... leaking

[drover]

Link to Jeep Parts List for 2.7 CRD and other engines is here:
http://www.ausjeepoffroad.com/forum/...ght=WG+FILTERS I haven't found a MB parts list but you always need to cross reference the Mopar number against the MB one as the OM 647 engine in the Jeep does some bits that are not found on other MB vehicles or Sprinters.

Messier, your post gave me a couple of numbers which I had but needed to ID which pipe they actually were, thanks.

[fester]

Originally Posted by Messier

Hi from north of ball
I have some mb- and Bosh part numbers for pump and fuel pipes.
Line from filter to low pressure pump is MB A 6650700532, mopar 05080482A

Line from low pressure pump to high pressure pump MB A6650700132 or 11617799402, Mopar05080483aa

line from rail end to high pressure pump MB 6120703232, Mopar 0508485aa.

the needed o-rigs for high pressure pump Bosch 0 445 010 019, MB A6120700001 Bosch o-rings 6 x F01M 100389.
Support rings 6 x F01M 100643,
o-ring 3 x F01M 0P0 743
sealing ring 3 x F00R 0P0 577
sealing ring 3 x F00R 0P0 480

To get out high pressure pump is easy way is to remove vacuum pump and move the high pressure pump that way.

I hope that my post help you little

br Messier

I presume Messier that the highlighted part numbers are for the pump itself and the following parts are all consumables for the pump. If not can you clarify what the others are actually for.

[bodgie]

I bought a kit for my leaking HP Pump from my local Bosch diesel service centre for the grand price of $33.

The part number is F 01M 101 455 for the pump part number 0445 101 019.

Jason

[drover]

Originally Posted by bodgie

I bought a kit for my leaking HP Pump from my local Bosch diesel service centre for the grand price of $33.

The part number is F 01M 101 455 for the pump part number 0445 101 019.

Jason

I'll add it to the CRD Parts Listing, good one Bodgie.