Quote:
Originally Posted by Treane
Just tested it and as a couple of you suspected removing the eTag from the windscreen made absolutely no difference.
At least we can put that myth to rest
Will need to adjust them manually I suppose.
|
Manually adjusting!!!..Never done it but this how I've believe it's done.
In the engine bay on each side above each headlights there is a slot about 13mm" X 25". Down throught the slot, about 100mm, there is a phillps screw adjustment.
With the headlights dimmed and the vehicle parked on a level surface about 2m from a wall, note where the lights hits the wall. Using a long phillps screw driver turn the screw clockwise to raise headlights and the opposite to lower (approx 2.5 turns adjust them 50mm). Road test and readjust as necessary.